To re-tune the S7070PVR at any time, select Satellite Scan. This will re-tune any Channels lost, if signal is sufficient, using frequencies already pre-configured with the S7070PVR.


If you require further information, the S7070PVR User Manual can be found online HERE.


'How to' re-tune the S7070PVR


Step 1: Open the Main Menu

  • With the Remote, go to Menu > Installation > Satellite Scan.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Main Menu.



Step 2: Select the Satellite

  • Select the Satellite you wish to scan, to confirm press the GREEN button on the Remote.
  • OPTUS D1 is the Satellite that broadcasts the Freeview Channels.



Step 3: Wait for the Satellite Scan

  • Please wait for the scan to complete, the scan takes approx. 1-2 minutes.



NOTE: Press the YELLOW button to Add, or Edit a Satellite. Select LNB Setup to adjust the LNB Frequency, if required.