'Download' the Channel Data

DOWNLOAD S7010PVR Channel Data (Zip File)

NOTE: Channel Data was last updated 05/2023.

How to 'Update' the Channel Data

Step 1: Identify your S7010PVR Revision No.

  • S7010PVR Revision 1, has both LNB IN and LOOP OUT connections on the Back Panel.
  • S7010PVR Revision 2, only has the LNB IN connection on the Back Panel, no LOOP OUT.

Step 2: Download the Zip File

  • Download the Zip File linked above, then extract the contents onto a USB Flash Drive.
  • Insert the USB Flash Drive into the USB Port on the Front of the S7010PVR.

Step 3: Open the Main Menu

  • With the Remote, go to Menu > Setup > SW Update.
  • Use the ◀ ▶ ▼ ▲ buttons on the Remote to navigate the Main Menu.

Step 4: Load the Channel Data

  • Select "Update by USB" in the SW Update Menu, press OK.
  • Select the Channel Data file that corresponds to your Revision No. and LNB Frequency: 10750 MHz, or 11300 MHz.
  • The S7010PVR will now load the Channel Data. When completed, it will return to Live TV.

NOTE: You can check your LNB Frequency, under Menu > Setup > Installation > My Dish. Select "Optus D1" from the Satellite List, press OK. Note the LNB Low Frequency: 10750 MHz, or 11300 MHz.